Welcome to the official website of PRIME TECHNOLOGY EQUIPMENT CO., LTD.!
Tel : +86-18605102468 E-mail : export@primeplas.com
E - charging, the most important is energy saving
Release time:
2023-03-27
Related information on E- charging. 1.1) There are two types of E-charging system, one is direct driven, the other is driven by the gearbox. 1.2) Select the torque (low or high) of the motor according to the viscosity characteristics of the raw material. 1.3) According to the tonnage of the injection machine, or the size of the injection volume, to choose direct driven or gearbox transmission. 1.4) Under normal circumstances, injection molding machine above 600ton will be equipped with gearbox transmission type of E-charging.
1) Related information on E- charging
1.1) There are two types of E-charging system, one is direct driven, the other is driven by the gearbox.
1.2) Select the torque (low or high) of the motor according to the viscosity characteristics of the raw material.
1.3) According to the tonnage of the injection machine, or the size of the injection volume, to choose direct driven or gearbox transmission.
1.4) Under normal circumstances, injection molding machine above 600ton will be equipped with gearbox transmission type of E-charging.
2) Features of E-charging
2.1) Energy saving. Through the test, the energy saving can reach around 15%-30%.
2.2) Realized synchronous charging, shorten production cycle, increase output.
2.3) Easy to maintain and faster to respond.
2.4) Low noise, no hydraulic oil pollution.
Address
NO.567-569 WESTERN JIANZHU ROAD WUXI CITY JIANGSU CHINA
